SHOE GOO - SHOE REPAIR ADHESIVE

Shoe goo waterproof repair adhesive is ideal to fix damaged roller skate's boot or prevent wear. It is designed for strong abrasion resistance and better adhesion to flexible materials. With Shoe goo, you can rebuild worn soles and heels, patch small holes, seal galoshes, waders or rubber and coat your roller quad boots in a permanent way.

Give a long lasting life to your roller derby skates! 

Content: 59ml

INSTRUCTIONS FOR SAFE USE

Follow these step-by-step directions when using Shoe GOO: 

DIRECTIONS - Read directions and test small area before use.

1. Surface should be clean, dry and free of dirt.
2. Puncture seal in neck of tube using pointer cap. Ideal application temperature range is 50 to 90 ºF (10 to 32 ºC). However, fully cured adhesive can withstand temperatures from -40 to 180 ºF     (-40 to 82 ºC) intermittently.
3. Apply directly to surfaces to be protected, bonded or repaired. For  waterproofing and protecting, use thin coats (spread with a  disposable tool) to build a thick coating, allowing each layer to set 3-4 hours.
4. Allow repair to cure for 24 hours. Depending on materials and temperature, maximum strength may not be reached for 48 to 72 hours.
5. For future easy cap removal, apply a thin coat of petroleum jelly to the threads of the tube before replacing the cap.
6. Clean uncured adhesive with acetone or citrus-based solvents.  Cured material may be removed by cutting or scraping.